Home › Store Products › Machines & Equipment › Cutting, Grinding & Drilling Equipment
Machines & equipment
Cutting, Grinding & Drilling Equipment
The machines most trades use daily, across masonry, metal, stone and timber.
Overview
What this covers
Material
What you are cutting decides the blade, not the machine.
Size
Disc or blade diameter sets depth of cut.
Duty
Occasional or continuous use.
Equipment
Machines in this group
Marked by how we normally hold them. Availability is confirmed at quotation.
Angle grinders
The most-used machine on most sites.
Cut-off machines
Straight cuts in metal and masonry.
Stone & tile cutting
Marble, granite and ceramic.
Saws
Timber and board.
Drilling
General and heavy drilling.
Magnetic drilling
Drilling into structural steel in place.
Diamond drilling
Clean holes through hard material.
Applications
Typical work
- Cutting reinforcement, sections and sheet metal
- Cutting masonry, tile, marble and granite
- Grinding welds and preparing surfaces
- Cutting timber and board on site
- Drilling into concrete, masonry, steel and timber
- Drilling structural steel in position
Who buys these
Trades and teams
Power
Power and drive options
Most of this category runs from a normal single-phase supply, which is why it is the equipment contractors buy first. Cordless professional tools have become genuinely capable, and they suit work where dragging a cable is the real obstacle — but battery platforms lock you into a brand, so the platform decision matters more than any single tool.
Larger cut-off machines and magnetic drills may want a heavier supply. Confirm before ordering.
Comparison
How the options compare
| Corded | Cordless | |
|---|---|---|
| Run time | Continuous | Battery dependent |
| Power delivery | Consistent | Varies with charge |
| Site cable | Required | Not required |
| Best for | Continuous work at one point | Access work, moving around, no supply |
| Ongoing cost | Consumables only | Consumables plus battery replacement |
| Lock-in | None | Battery platform ties you to a brand |
Choosing
How to choose
- Name the material first. Metal, masonry, stone, tile and timber each need a different blade — often on the same machine.
- Pick disc size by depth of cut. A larger disc cuts deeper but the machine is heavier and harder to control for fine work.
- Match duty to use. A grinder used for an hour a day and one used all day are different classes.
- Decide corded or cordless deliberately. Cordless is about access, not about power. If the machine stays in one place, corded usually makes more sense.
- If cordless, choose the platform. Batteries and chargers cost more over time than the tools. Committing to one platform is the decision.
Accessories
What goes with it
Accessories
Consumables and wear parts
Safety equipment
Ownership
Maintenance, spares and service
Keep air vents clear — blocked vents are the most common cause of a burnt-out motor. Check carbon brushes on brushed machines and replace before they damage the commutator. Never run a machine with the guard removed, whatever the site habit.
Record serial numbers. On tools this heavily used, warranty claims are common and the serial is what makes them possible.
Price
What affects the price
- Machine class and body size
- Power rating
- Motor type — brushed or brushless
- Corded or battery platform
- Brand
- Accessories and case included
- Warranty terms
- Spare parts and service availability
- Quantity
Availability
What affects availability and lead time
- Grinders, drills and cutters are the fastest-moving items in the range
- Larger cut-off machines available through the supplier network in limited quantity
- Magnetic drills and diamond drilling equipment are usually sourced on order
- Specific battery platforms and kit configurations may need confirmation
Quotation
What to send with an enquiry
- What material you are cutting or drilling
- Disc or blade size you intend to use
- How often and how long the machine runs
- Power available on site
- Corded or cordless preference, and any existing battery platform
- Quantity and preferred brand
- Whether a case, guard or accessories are needed
Avoid
Common mistakes
- Buying a light-duty machine for daily professional use
- Ignoring the battery platform when buying a first cordless tool
- Using the wrong disc for the material
- Running with vents blocked by dust
Questions
Frequently asked
How do I choose an angle grinder?
Start with disc size, then duty. Smaller bodies suit one-handed work and finer control; larger ones cut deeper but are heavier and more demanding to hold.
Then decide how many hours a day it runs. A professional-duty machine costs more and lasts considerably longer under continuous use.
What machine is used for cutting tiles?
For straight cuts in ceramic, a manual tile cutter is quick and produces no dust. For porcelain, stone, mitres and awkward shapes, a wet tile saw or a marble cutter with the right blade is normally used.
Tell us the tile type, thickness and the volume of cutting and we will identify suitable options.
Corded or cordless for professional use?
Corded for continuous work in one place. Cordless where access, height or the absence of a supply is the real constraint. Most contractors end up with both, and choose one battery platform to stay on.